V3 Lap Timer 10 Seconds Interval Time, Set of Receiver & Infrared Beacon for Motorcycle Karting Racing Track Trackday Training

This racing lap timer comes with one transmitter(beacon) and timer.

This lap timer infrared will count the time for you at 0.02s/lap accuracy which is 20 times as accurate as human hand, you no longer need anybody to stand by the track to count the time for you. The infrared lap timer comes with user manual and it takes less than 1 minute to learn how to use.

More Features of this lap counter timer:

1. The transmitter(beacon) is more power and make the signal distance can reach 15 meters. 2x AA batteries lasts 5 hours.

2. The racing track timer for motorcycle come with an extension cord 1.5m, can be adjusted the signal angle when installed on any appliation ; The motorcycle lap timer can be used on cars, motorcycles, karting, dirtbikes, bicycles and much more.

3. The transmitter can be placed anywhere conveniently.

Specification:
Item: Lap timer
Material: Plastic
Color: Black
Interval timer: 10 seconds(the next counting will NOT be recorded if it is less than 10 seconds from previous lap)
Max.Receiving distance: 15 meters
Max Lap time and Max total time: 99 minutes 59 seconds
Max lap to record: 99 laps(recommend you clear the memory before using)
Battery for Lap timer: cr2032.3v
Battery for Transmitter: 2 x AA Battery(Lasting 5 hours continuously)
Size of Lap timer Receiver: 65x40x12 mm
Size of transmitter: 65x40x24 mm

Package Included:
1 piece x Lap Timer Receiver(Receiver which is with cable)
1 piece x Transmitter
Note: The AA batteries inside the lap timer are not included due to the strict air shipping policy.

Function:
The Lap Timer (Receiver):
UP:          The LCD shows one lap backward;
DOWN:   The LCD shows one lap forward;
SUM:       Summary; Slowest lap time, fastest lap time, Total time and average lap time;
CLR:         A two-second press will clear the memory and turn on the signal receiver,so the timer will start to count when it passes the signal; A short press will stop the timer from counting;

The transmitter:
The transmitter has laser pointer and the signal transmitter to build the Signal wall(we recommend that the transmitter and signal receiver on the end of the lap timer cord at the same horizontal line for the better function);
It is proposed to turn off the transmitter to save power if not use;

How to use:
1.Turn on the power. The switch should be at the On position; The LCD will show the total lap time of last session; And LCD will show:

If the record has been cleared, the signal receiver will start to work; And LCD will show:

2. Press CLR for more than 2 seconds, the memory will be cleared, and signal receiver will be turned on; And LCD will show:

3. When the LCD shows that the signal receiver is on, the UP\Down\SUM will be inactive;
4. When the bike passes the infrared signal for the first time, the lap will turn 1, and the timer starts to count;
5. The last lap record will be shown for 10 seconds on the LCD; and then the real time record will be displayed;
6. To stop time counting, press the CLR button; The signal receiver will be turned off, and the total time will be displayed on the LCD;

After you use:
7. When the signal receiver is off,  CLR is inactive, unless press it over 2 seconds to clear the memory and start the next counting;
8. When the device is idle for 20 minutes(no signal, no button touch) the system will go to sleep status to save power;